Products

  • PP RESIN《NOVATEC™》
    • Monopolymer : high stiffness, high heat resistance
    • Random copolymer: high transparency, high gloss
    • Block copolymer: high toughness, high stiffness
  • PP RESIN《WINTEC™》
    • Very low oligomers and odor
    • Excellent heat sealing performance
    • Compared with random copolymerized polypropylene that using traditional Ziegler-Natta catalysts, the transparency is greatly improved.
    • Optimized melt strength and high ductility
  • HMSPP RESIN《WAYMAX™》
    • High melt tension
    • Very little oligomers and odor
    • Excellent foaming applicability and hot stretch formability
  • PP RESIN《FUNCSTER®》
    • High impact resistance
    • High stiffness
    • High thermal resistance, low temperature expansion coefficient
    • Good dimensional stability
    • Low residual oil traces
    • Good flowability
    • Good resistance to plastic deformation and vibration fatigue
  • 《Z CLEAN》
    • High cleaning power
    • Easy to use
    • Excellent effect
    • Wide range of working temperatures
    • Suitable for various thermoplastic resins
    • Suitable for various plastic machinery
    • No need to remove tube head, mold or filter
    • No damage to the machine
    • Don’t produce odor or smoke
    • Safe and non-toxic
    • Still effect even in shutdown status
  • PC RESIN《PANLITE®》
    • Impact resistance : the material with the best impact strength among plastic raw materials, better than zinc and lead metal
    • High heat and cold resistance : stable performance within the temperature range -100~126°C
    • Good electrical characteristics : even if the temperature changes drastically, its electrical characteristics will not be affected, and the insulation is excellent
    • High transparency : good light transmittance, suitable for optics and plates
    • High dimensional stability : low creep, minimal dimensional changes under high and low temperature changes, good fatigue recovery, low moisture absorption
    • Flame resistance : 94 V-0, 94V-1, 94V-2
  • PC RESIN《PANLITE®*》
    • High refractive index
    • Low complex refractive index
    • High heat resistance
  • PC/ABS《MULTILON®》
    • Retaining the original advantages of polycarbonate resin-PC, combined with the easy processing characteristics of ABS resin, it is suitable for use in products such as laptops, office machines, and automobile parts.
  • PEN RESIN《TEONEX®》
    • Good transparency, good chemical resistance and hydrolysis resistance
    • High heat distortion temperature, high heat resistance (50°C higher than PET’s heat resistance)
    • Good gas and water resistance
    • Low gas adsorption and almost no odor absorption
    • Radiation-resistant sterilization
    • UV resistance
  • Medical-related materials
    • Resistant to gamma rays and electron beams
    • Resistant to steam sterilization
    • Chemical resistance, air resistance, light resistance
    • Low oligomers (no heavy metals)
  • FCX-210《Flame GUARD®》
    • High Flame retardant
    • Suitable for various resins, adhesives, coatings, etc.
    • Low addition volume
    • low solubility
    • High heat resistance
    • Can be used as an additive
    • Transparent Flame retardant
    • Flame extinguishing property
  • TCC《CARBOSISTA®》
    • Suppress the production of toxic gases
    • Improve resistance to hydrolysis
    • Improve resin compatibility
    • Improve heat resistance
    • Cross-linking through heterogeneous bond bridges has the effect of hardening (increasing Tg) and increasing viscosity
  • PET RESIN
    • Excellent thermal stability, less bleed-out, less likely to produce volatile matter that may cause scorching
    • Less residual oligomers and low crystal point
    • non-heavy metal
    • Minerals are widely distributed and are not easily affected by a single government policy.
  • PMMA RESIN《ACRYPET™》
    • Excellent optical performance and transparency: suitable for various optical products
    • Good weather resistance: even if exposed to the outdoors for a long time, its optical and mechanical properties will hardly deteriorate
    • Good scratch resistance: its hardness is the same as aluminum metal
    • Light weight: specific gravity 1.19, only half the weight of inorganic glass
    • Good chemical resistance: resistant to most chemicals in daily life
    • Environmentally friendly: suitable for food and medical equipment, environmentally friendly plastic, safe and recyclable
  • PMMA SHEET《SHINKOLITE-A™》
    • High transparency: 93% total light transmittance, much higher than other plastics and ordinary inorganic glass
    • High processability: can be cut, drilled, single-curved, multi-curved, easy for solvent adhesion
    • Colorability: Able to freely adjust various colors required by customers
    • Impact resistance: Excellent impact resistance, even if it is broken, there will be no flying fragments like inorganic glass
    • Good weather resistance: can withstand sunlight, wind, snow, and rain erosion, suitable for buildings, outdoor signs, etc.
  • POM RESIN《TEPCON™》
    • Stable mechanical properties
    • Good creep resistance
    • Fatigue resistance
    • High stiffness and good elastic recovery
    • Excellent wear resistance and self-lubrication
    • FDA and water material related certifications
    • Good heat resistance
    • Small variability in water absorption
    • Good chemical resistance (resistant to strong acids, strong oxidants, inorganic chemicals and oils, etc.)
    • Good fluidity, good appearance and good formability
    • Can be used for insert molding, insert molding, cutting, welding and printing, etc.
  • POM RESIN《DURACON™》
    • Stable mechanical properties
    • Good creep resistance
    • Fatigue resistance
    • High stiffness and good elastic recovery
    • Excellent wear resistance and self-lubrication
    • Good heat resistance
    • Small variability in water absorption size
    • Good chemical resistance (resistant to strong acids, strong oxidants, inorganic chemicals and oils, etc.)
    • Good fluidity, good appearance and good formability
    • Can be used for insert molding, insert molding, cutting, welding and printing, etc.
  • PPS RESIN《DURAFIDE™》
    • High mechanical strength, especially excellent bending strength, and good elastic recovery
    • High toughness, excellent compressibility, impact shear and torsional shear properties
    • Shows good creep resistance under high temperature and high load conditions; good fatigue resistance under repeated stress conditions
    • High toughness and high impact strength improve the original brittleness problem of cross-linked PPS
    • Can be immersed in a soldering bath at 260°C for 10 seconds and can be used in surface packaging technology of electronic parts
    • Low ionic impurity content, suitable for parts with higher electrical performance requirements
    • Under repeated conditions of high temperature, the volume resistance does not change with time, and the dielectric constant does not change with frequency and temperature.
    • The bonding line has high strength and is suitable for secondary processing such as threading and pressing.
  • LCP RESIN《LAPEROS™》
    • During molding, the molecular bonds are neatly arranged along the flow direction, and the material has high strength and elastic modulus.
    • Good vibration absorption
    • Linear expansion coefficient is extremely small, comparable to metal
    • The thinner the thickness of the product, the greater the proportion of surface layer arrangement. Therefore, the strength and elastic modulus of thin-walled products are relatively high.
    • The material has a dense crystal structure, and its heat deformation temperature is 160~340℃ (depending on the grade), continuous use temperature (220~240℃), and welding heat resistance (260℃ × 10 seconds ~ 310℃ × 10 seconds)
  • COC RESIN 《TOPAS™》
    • High transparency: light transmittance as high as 91%
    • Good optical properties: low birefringence, high Abbe number
    • Low specific gravity: specific gravity 1.02
    • High heat resistance: Tg up to 180° C
    • Low moisture absorption: dimensionally stable and optically stable
    • Excellent water vapor airtightness: easy to store internal contents
    • Low dielectric constant, dielectric tangent: low loss of high frequency signals
    • FDA, USP and ISO10993 certification: suitable for food containers and medical supplies
    • Applicable to various sterilization methods: UV, γ ray, EOG
  • PBT RESIN 《DURANEX™》
    • The reinforced grade has high strength and high stiffness. It has a high thermal deformation temperature and can show good creep resistance under high temperature and high load conditions.
    • The non-reinforced grade has good toughness and is not easy to break.
    • Good electrical properties
    • Very low water absorption, maintains good electrical performance even after long-term use in a wide temperature range
    • Excellent surface gloss and low friction coefficient, suitable for parts with high wear resistance requirements
    • Minimal dimensional variability, good formability and dimensional stability
    • Good long-term chemical resistance. At normal temperature, even if it is immersed in chemicals (except strong alkali), its physical properties will hardly change.
    • Both non-reinforced and reinforced grades have good fluidity and formability.
  • PET RESIN《RENATUS™》
    • Good heat resistance
    • High stiffness, chemical resistance and good appearance
  • ABS RESIN
    • Good dimensional stability
    • Suitable for extrusion, injection, blowing, vacuum and other molding methods
    • Suitable for electroplating, noise reduction, high surface brightness, soft wear-resistant and other materials
  • ASA RESIN
    • Excellent weather resistance properties
    • For outdoor use, there are few changes in color and gloss.
    • Good resistance to chemicals
  • AES RESIN
    • Excellent weather resistance
    • Excellent self-lubrication
    • Excellent friction and scratch resistance
  • PA RESIN《Zytel® HTN》
    • Still maintains good performance under high temperature and high humidity environment
    • Good creep resistance
    • Good dimensional stability
    • Good chemical resistance
    • Good water resistance
    • Good formability
    • Can replace metals to reduce costs
  • TPEE ELASTOMER《Hytrel®》
    • Compared with rubber, Hytrel has:
      • Strength and durability
      • Heat resistance (can be used in a wide range of temperatures)
      • Oil and chemical resistant
      • Ozone resistance
      • Molding processability
      • Coloring and painting properties
    • Compared with plastic, Hytrel has:
      • Sound absorption
      • Impact resistance
      • Elastic recovery property
      • Low temperature characteristics
      • Fatigue resistance
  • ABS RESIN《TOYOLAC®》
    • Impact resistance, bending resistance, compression resistance: can be used as a metal substitute
    • Ease of processing
  • PBT RESIN《TORAYCON®》
    • Rapid prototyping and high crystallization rate
    • Good surface gloss
    • High dimensional stability
    • Excellent wear resistance
    • Good chemical resistance
    • Good electrical properties
    • Good creep resistance and fatigue resistance
    • Can be used for a long time in the temperature range of 120~140°C
    • Low hygroscopicity
  • NYLON 6/NYLON 66 RESIN《AMILAN®》
    • Good heat resistance: nylon 6 has a melting point of 225° C, and nylon 66 has a melting point of 260° C. Excellent resistance to hot water and not easy to be hydrolyzed by heating
    • Self-lubricating: Nylon has self-lubricating properties, so it has good wear resistance and is suitable for gear products.
    • Good electrical characteristics: can be widely used in terminal connectors, transformer bobbins, switch parts, etc.
  • PPS RESIN《TORELINA®》
    • Good heat resistance
    • Good Flame retardancy
    • Good chemical resistance
    • High mechanical strength
    • High flowability
  • NYLON 6/NYLON 66 RESIN《GRILON®》
    • High impact strength
    • High thermal distortion temperature
    • Good wear resistance
    • Good chemical resistance
    • Good electrical properties
  • NYLON《GRIVORY® GV》
    • High strength, high toughness
    • Good dimensional stability and low warpage
    • Good chemical resistance
    • Good surface quality
  • NYLON 12《GRILAMID®》
    • High impact strength
    • Good weather resistance
    • Good chemical resistance
    • Excellent wear resistance and surface sliding properties
    • Ultra-low moisture absorption, high dimensional stability
    • Low density
    • Low temperature impact resistance
    • Good insulation properties
  • TRANSPARENT NYLON 12《GRILAMID® TR》
    • High transparency: Thick meat products still maintain high transparency
    • Good resistance to stress release and chemical resistance
    • Dimensional stability
    • Lightweight and low density
    • Low water absorption (compared to regular nylon)
    • High heat distortion temperature, high Tg
    • Low molding shrinkage and uniform shrinkage
  • HIGH TEMPERATURE RESISTANT NYLON《GRIVORY® HT》
    • HT1 Specification: PA6T/6I
    • High stiffness and strength in high temperature environments
    • The physical properties of the product remain almost unchanged after absorbing moisture.
    • Good dimensional stability and low warpage
    • Good chemical resistance
  • 《POTICON》
    • Enhancement of subtle parts
    • Good friction and wear properties
    • Good recyclability
    • Good dimensional accuracy and stability
    • Excellent surface smoothness
    • Good molding processability
  • 《TISMO》/《TERRACESS》
    • High strength
    • High elasticity
    • High length to diameter ratio
    • Improved performance
  • 《DENTALL-WK》
    • High strength
    • High elasticity
    • High length to diameter ratio
    • Improved performance
    • Can add conductive properties to paints, adhesives, resins, etc.
  • PPS RESIN《DIC.PPS》
    • Heat resistance for continuous use above 200° C
    • Maintains strength and high stiffness over a wide temperature range
    • Resin’s inherent V-0 Flame retardancy
    • Good dimensional stability
    • Chemical resistance second only to fluorine resin
  • TPU
    • Divided into two categories: aromatic (wide applicability), aliphatic (yellowing resistance)
    • Polyether type: high strength, hydrolysis resistance, high resilience, and good low temperature performance.
    • Polyester type: good tensile properties, flexural properties, abrasion resistance, solvent resistance and high temperature resistance.
    • Polycaprolactone: compression distortion properties, good chemical resistance, high resilience, good hydrolysis resistance and oil resistance.
  • LONG FIBER COMPOSITE MATERIALS
    • Excellent mechanical properties (high stiffness, wear resistance, dimensional stability, etc.)
  • TX POLYMER MS RESIN
    • Low density, low moisture absorption, good formability, and good thermal stability
  • NYLON RESIN《 GLAMIDE® 》
    • High stiffness and strength: can be used as a metal replacement
    • Excellent appearance: Meets requirements for sufficient strength and good appearance
    • High dimensional accuracy
    • Special uses: good self-lubricating properties, high abrasion resistance, good weather resistance, easy painting, good electrical conductivity, high melting point 6T nylon and transparent nylon
  • THERMOPLASTIC POLYESTER RESIN《 VYLOPET® 》
    • Good electrical characteristics: suitable for electronic parts
    • Excellent heat resistance and chemical resistance: can be used in high temperature environments
    • High stiffness and dimensional stability: It can replace metal or thermosetting resin, has small dimensional changes at ambient temperature and does not lose mechanical properties due to water absorption.
    • Good appearance and formability: It has sufficient strength and can easily obtain good surface appearance during molding.
    • Recyclability: Recycled PET grades can also be used for functional parts.
    • High flowability: Thin wall molding possible
  • THERMOPLASTIC POLYESTER ELASTOMER《 PELPRENE® 》
    • Hardness characteristics: Hardness grades range from 70A to 78D, with multiple hardness options available
    • Heat resistance: usable temperature range from low to high, excellent low temperature performance
    • Excellent oil resistance, chemical resistance and deformation resistance
    • Easily moldable properties: Easily processed by injection molding, extrusion or blow molding.
  • Cavinon® Inorganic/organic mixed mildew inhibitor
    • Good heat resistance and can be kneaded and processed
    • Excellent water resistance, chemical resistance and durability
    • Good releaseability and continuous anti-mildew effect
    • Also available with high antibacterial agent + anti-mildew materials
  • AlleRemove® Anti-allergen processing agent that can reduce allergens such as dust mites and pollen
    • Good water resistance
    • Not easy to discolor and does not damage the appearance of the product
    • Effectively reduce dust mites, pollen and other allergic substances
    • Excellent heat resistance suitable for various processing
  • KESMON® Inorganic chemical adsorption deodorant
    • Can absorb and deodorize ammonia, acetic acid, hydrogen sulfide, aldehyde odors and VOCs
    • Different from physical adsorption, it can reliably absorb low-concentration odors
    • Through chemical adsorption, it no longer releases odor
    • Good heat resistance and can be kneaded and processed
    • Instant and short-term deodorizing effect
  • NOVARON® Silver-based inorganic granular antibacterial agent for water treatment
    • Suitable for various sinks or drainage pipes, which can inhibit water corruption for a long time
  • NOVARON® Inorganic antibacterial and antiviral agents have the effect of inactivating various viruses such as influenza and SARS.
    • Superior immediate antiviral effect in minutes
    • Good heat resistance and can be kneaded and processed
    • Complies with the “SEK MARK” certification standards for antiviral processing of the Japan Fiber Evaluation Technology Council
    • Antibacterial effect
    • Insoluble in water and solvents, good durability
  • NOVARON® VZ series is a new type of glass-based antibacterial agent with zinc antibacterial component.
    • Compared with silver-based inorganic antibacterial agents, it almost does not discolor during processing and use.
    • There are also product numbers that are suitable for use with transparent resin and will not easily damage its transparency.
    • Excellent heat resistance, suitable for various resin processing
  • NOVARON® AG series is an antibacterial agent developed exclusively by our company that uses inorganic ion exchangers to carry silver ions.
    • US FDA and EPA login
    • Uniform 1μm microparticles can knead fibers
    • Heat resistance above 800℃ and good chemical resistance
    • No moisture, good processability
  • PP RESIN《DYNACHISSO PP》
    • DYNACHISSO company was jointly established by JNC Group and Dynachem. In 2020, PTT Global Chemical PLC (abbreviation: PTTGC) joined the joint venture to jointly expand and develop customers in the Southeast Asian market. Through the plastic materials that both parties have been deeply involved in the field of polypropylene for a long time Composite experience, thus creating high-quality DYNACHISSO PP and other composite materials.
  • 《DYNACOM®PMMA》
    • High transparency: 92% light transmittance, higher than ordinary transparent ABS resin
    • High gloss: The surface of the product is high gloss and the appearance is bright
    • Weather resistance: Suitable for products that require long-term outdoor exposure
    • Impact resistance: Good impact resistance in transparent resin
    • Chemical resistance: Resistant to commonly used chemicals
    • Good hue: good hue stability, easy to color and beautiful
  • EGGSHELL BIOCALCIUM
    • GEX: sustainable biocalcium for plastic reduction
    • GEX starts manufacturing by collecting eggshell powder from discarded eggshells. Through a patented calcining and compounding process, the eggshells are finally converted into bio-calcium plastic particles.
    • GEX plastic can replace more than 20% ~ 50% of plastic particles, making products a solution for ESG and sustainability goals of reducing carbon emissions.
  • 100% PCR material
    • 100% Post – Consumer – Recycled materials, maximizing carbon emission reduction
    • 100% of PCR materials have obtained third-party GRS (Global Recycled Standard) certification

Connect with Us

We look forward to hearing from you and exploring how we can work together to achieve your goals.
Contact Us